|
Huaheng Mould |
home >> Products
>> Plastic
Machine >> Injection Moulding Machine >> HQS-760 |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SpecificationHQS-760 |
UNIT |
A |
B |
C |
|
INJECTION UNIT |
Screw diameter |
mm |
90 |
100 |
110 |
Screw L/D ratio |
L/D |
22.2 |
20 |
18.2 |
|
Shot volume (theoretical) |
cm3 |
2988 |
3689 |
4464 |
|
Injection weight(ps) |
g |
2720 |
3357 |
4062 |
|
Injection pressure |
mpa |
215 |
174 |
144 |
|
Injection rate(ps) |
g/s |
500 |
618 |
747 |
|
Plasticizing capacity(ps) |
g/s |
70.4 |
85.6 |
104.8 |
|
Screw speed range |
rpm |
0-110 |
|||
CLAMPING UNIT |
Clamping force |
KN |
7600 |
||
Space between tie bars |
mm |
950x900 |
|||
Opening stroke |
mm |
910 |
|||
Max. mold height |
mm |
940 |
|||
Min. mold height |
mm |
440 |
|||
Ejector force |
KN |
185 |
|||
Ejector stroke |
mm |
270 |
|||
OTHERS |
Pump motor power |
KW |
37+30 |
||
Heater power |
KW |
38.5 |
|||
Oil tank capacity |
L |
1800 |
|||
Machine weight |
T |
42 |
|||
Machine dimension(LxWxH) |
m |
10.5x2.2x2.6 |
|||
 |
| Site map | Service | Privacy | Feedback | Home |
|
Injection Moulding Machine-HQS-760